Steam Generators and Exhaust Gas Boilers 150 - 40,000 kg/h
		Feedwater Skids		Copyright © 2007
	Care and control of feedwater is essential for all types of boiler. Fortunately the feedwater requirements for the Clayton Steam Generator can be easily achieved using only a few main components. FEEDWATER SYSTEMS The correct selection of feedwater equipment will ensure trouble-free operation of the steam generating plant. Clayton offer a range of ancillaries which are matched to the particular Clayton Steam Generator and are designed and manufactured to the same high standards. A common system - which suits most raw water types - includes a feedwater tank, a simple chemical dosing system, a water softener and a blowdown tank. The equipment can be supplied as individual items to be installed separately or as a skid mounted  package which will minimise site costs as well as installation time. THE CLAYTON FEEDWATER SKID The Clayton Feedwater Skid is a factory assembled packaged feedwater system. All of the skid mounted equipment is completely piped and wired before despatch. The package also includes all necessary valves, fittings, filters and controls.   The Clayton Feedwater Skid is designed and manufactured by our specialist engineers and is thoroughly inspected and tested before it leaves the factory. Our standard designs can be used or the package can be customised to suit the specific client or site requirements.  Control of the skid mounted equipment is from an integral panel which can interface with the Clayton Steam Generator control system if required.  The use of a Clayton Feedwater Skid means that pipework and electrical wiring on site is reduced to a  minimum. Once the skid arrives at the customers premises it can be quickly positioned and connected.  Our engineers will be pleased to discuss the available options and agree the best solution for each application.